Sera pH Test Kit

Categories: Aquarium Products, Test Kits

Description
Directions for use:

Sera pH Test Kit Test for pH

For approx. 100 measurements – tests.

Makes it easy to monitor the pH value in fresh and marine water and ponds. For approx. 100 measurements.

Make sure the carbonate hardness is at least 5°dKH as to achieve a stable pH value.
Otherwise, there is danger of varying (suddenly sinking!) pH value.
Therefore, always check the carbonate hardness by means of the sera kH-Test before adjusting the pH value.

Directions for use:

Shake reagent bottle well before using!
Do not allow tested water to contact aquarium or pond water!

Rinse the measurement vial several times with the water to be tested, then fill to the 5 ml mark. Dry the vial on the outside.
Add 4 drops of the reagent and shake the vial until the liquid is evenly distributed.
Compare the colors immediately. Place the vial on the color chart and compare from a position above under natural daylight. Avoid direct sunlight.
Match the resulting color on the color chart and read off the pH value.
Cleaning: Clean the vial thoroughly with tap water before and after each test. Close reagent bottle immediately after use.

Store at room temperature and away from light.
Keep locked up and out of the reach of children.
For testing ornamental fish aquariums and pond water only.