Sera NH4/NH3 Test Kit Ammonia

SKU: 4001942049108 Categories: Aquarium Products, Test Kits

Description
Directions for use:

Sera NH4/NH3 Test Kit Ammonia – Monitoring Ammonia Levels in Water

Test for Ammonia NH3 / Ammonium NH4

High ammonium levels indicate a disturbed or not fully developed bacterial activity in the filter.

Ammonia (NH3) formed from ammonium (NH4) in case of pH values above 7 is especially dangerous.

Even ammonia values of 0.02 mg/l lead to gill damages in the long term.
Therefore you should always check the pH value in addition to the NH4 level.

Directions for use:

Shake reagent bottle well before using!
Do not allow tested water to contact aquarium or pond water!

Rinse the measurement vial several times with the water to be tested, then fill to the 10 ml mark (freshwater) or the 5 ml mark (marine water). Dry the vial on the outside.
Add 6 drops of reagent 1 and shake until the liquid is evenly distributed.
Add 6 drops of reagent 2 and shake the same manner.
Add 6 drops of reagent 3 and shake the same manner.
Compare the colours after 5 minutes. Place the vial on the chart and compare the colors from a position above under natural daylight. Avoid direct sunlight.
Compare the colours after 5 minutes. Place the vial on the chart and compare the colors from a position above under natural daylight. Avoid direct sunlight.
Cleaning: Clean the vial thoroughly with tap water before and after each test.

Close reagent bottle immediately after use and do not exchange caps.
Store at room temperature and away from light. Keep locked up and out of the reach of children.
For testing ornamental fish aquariums and pond water only.